How Do I Bind with the RENZ ECO 360 Comfort Wire Binding Machine?

The RENZ ECO 360 Comfort wire binding machine is a 2:1 pitch wire binder that is designed for medium-to-large office use, with a user-friendly electric punching mechanism that is able to punch up to 30 sheets at a time. The ECO 360 Comfort features a built-in manual wire closer that can accommodate twin-loop binding spines up to 1-1/4″ in diameter. Below are step-by-step instructions for binding books using the RENZ ECO 360 Comfort wire binder:

  1. Use the measuring scale located toward the rear of the machine to determine the diameter of the wire binding spine that will be required based on the thickness of your book.
  2. Set the wire closer to match the diameter of your wire. The wire closer is adjusted using the sliding scale located on top of the closer itself. Begin by loosening the screw knob, then slide the knob until it is aligned with the correct diameter and tighten it to finalize the adjustment.
  3. Use the depth margin control knob to set the amount of space between the edge of the paper and the punched holes. As a guideline, thick documents tend to have larger punching margins than thin documents.
  4. Adjust the side guide to correspond to the sheet size of your document. Loosen the screw, re-position the guide, and tighten the screw to prevent the guide from shifting during use.
  5. Disengage any punching dies that are needed to prevent holes from being partially-punched along the ends of your sheets. A die can be disengaged by pulling the corresponding pin straight upward until it stops. A previously-disengaged die can be re-engaged by pushing the pin back into the machine.
  6. Set the position of the closing rail based on the size of the binding wire that will be used. The closing rail has two positions – one that is used for wires 3/16″ – 1″ in diameter and the other for wires 1-1/8″ – 1-1/2″ in diameter. To adjust the closing rail, push the buttons located on both sides of the rail and turn as necessary.
  7. Place the wire binding spine onto the wire holder. The wire holder allows you to immediately insert punched pages onto the wire for increased productivity.
  8. Arrange the pages of your book so that the back cover is placed on top of the front cover and the faces are against one another. Turn the entire stack over so that the covers are at the bottom. Placing them in this order will allow you to conceal the seam of the closed wire within the book.
  9. Insert up to 30 sheets (based on 20 lb. paper) into the punching channel, aligning the pages against the side guide. Note: If you are punching thick cardstock or PVC covers, punch them separately from the internal pages of your document.
  10. Press the foot pedal to start the motor and punch through the inserted sheets. After punching, thread your sheets onto the binding wire.
  11. Repeat steps 9 – 10 until your document has been completely punched and inserted onto the wire.
  12. Lift the twin-loop wire off of the wire holder and place it into the wire closer. The open side of the wire should face toward the machine and sit flush against the back of the closer.
  13. Pull the closer handle forward to close the wire spine. Return the handle to its upright position in order to open the wire closer.
  14. Remove your book from the wire closer and turn the back cover around to the back of the book to complete the binding process.

Tips:

  • To keep the machine clean and free of debris, it is recommended that you periodically wipe it clean with a dry or slightly moist cloth. Do not use harsh cleaners or solvents, as they may remove the labels on the machine.
  • Empty the waste drawer frequently during use. Attempting to punch while the waste drawer is full can lead to jams or cause damage to the machine.

How Do I Bind with the RENZ ECO S 360 Wire Binding Machine?

The RENZ ECO S 360 wire binding machine is an all-manual 2:1 wire binder that is designed for durability, with a powerful punching mechanism that is capable of punching up to 30 sheets per pull. For increased versatility, the ECO S 360 features 28 fully-disengageable punching dies as well as an adjustable punching depth margin to help ensure a professional-looking bind on documents of almost any size. Below is a step-by-step guide to binding books with the RENZ ECO S 360 wire binder:

  1. Begin by measuring the thickness of your book using the ECO S 360’s measuring scale, which is located toward the back of the machine. The measuring scale will indicate the recommended twin-loop binding wire size for your document.
  2. Configure the wire closer to match the size of the wire that will be used. To adjust the wire closer, set the position of the sliding scale to correspond with the diameter of the wire.
  3. Set the punching depth margin using the punching depth control knob. The larger the punching depth, the greater the amount of space between the edge of the sheets and the punched holes.
  4. Position the paper guide by loosening the screw that holds it in place, sliding the guide so that it corresponds with the sheet size that will be punched, and tightening the screw to secure it. The paper guide helps to center the holes on your pages and makes for more consistent hole placement throughout the length of your document.
  5. If necessary, disengage any dies to remove partially-punched holes along the edges of your paper. Dies can be disengaged by pulling straight upward on the corresponding pin.
  6. Adjust the closing rail based on the diameter of your binding wire. The closing rail has two positions – one for use with wires from 3/16″ to 1″ and the other for closing wires from 1-1/8″ to 1-1/2″. To set the closing rail, push the buttons located on each side of the rail, then rotate it 180 degrees to change the rail position.
  7. Set the selected 2:1 pitch binding wire onto the wire holder on the front of the machine. The wire holder will keep your wire steady so that you can easily insert the pages of your document as they are punched.
  8. Arrange the pages of your book so that the back cover is on top of the front cover and they are facing one another. Turn the book over so that the covers are at the bottom of the stack.
  9. Place up to 30 sheets into the punching throat, aligning them to the paper guide.
  10. Pull the punch handle (located toward the rear of the machine) forward to punch through the inserted pages. Return the handle to its original position to retract the punching dies, then lift the punched pages out of the machine and insert them onto the binding wire.
  11. Repeat steps 9 – 10 until all of the pages of your document have been punched and placed onto the wire. Note: For best results, it is recommended that you punch the covers separately from the inner pages of your book.
  12. Lift the wire off of the wire holder and place it into the wire closer. The open side of the wire should sit flush against the back of the closer.
  13. Pull the closer handle (located toward the front of the machine) forward to engage the wire closer. The closer will stop automatically based on the wire diameter that was set in step 2. Lift the handle back into its starting position to open the closer.
  14. Remove your bound book from the closer, then flip the back cover around to the back of the book to hide the binding seam and complete the binding process.

Tips:

  • Empty the waste bin regularly to ensure smooth, consistent punching and reduce wear and tear on the machine.
  • The machine should be cleaned occasionally using either a dry or slightly moist cloth. Do not use solvents or harsh chemicals to clean your machine, as they may remove the decals.

How Do I Bind with the DFG ETitanComb Comb Binding Machine?

The DFG ETitanComb comb binding machine is a heavy-duty, all-electric comb binder that efficiently binds documents up to 2″ thick. The ETitanComb has fully-disengageable pins to accommodate a wide array of document sizes, in addition to an open punching throat, a side margin guide, and an adjustable punching depth for added versatility. Below is a step-by-step guide for binding books with the DFG ETitanComb comb binder:

DFG ETitanComb Comb Binding Machine
  1. If this is the first time that your DFG ETitanComb is being used, it will need to be set up prior to binding. Remove the screw located on the left side of the machine using a Phillips-head screwdriver. Place the binding handle onto the binding shaft so that the handle points toward the back of the machine, then thread the screw through the handle into the shaft and tighten it to secure. Insert the foot pedal plug into the foot pedal jack located on the back of the machine (below the power switch). Plug the power cord into the right side of the machine, then plug the opposite end into a power outlet.
  2. Turn on the power switch (located on the back of the machine).
  3. Use the comb Size Selector to determine the best plastic binding comb diameter based on the thickness of your book. To measure your document, place it under the Size Selector and press down until the bottom of the selector is flush against the top page. The top of the Size Selector will indicate which comb diameter is best suited for your book.
  4. Set the punching depth using the sliding control knob located on the left side of the machine (immediately above the side margin guide). The punching margin is generally larger for thicker documents than for thinner documents, because a greater punching margin makes it easier to accommodate large-size combs and helps to prevent tearing along the punched holes.
  5. Adjust the side guide (located on the left side of the machine base) to center the sheet within the punch. The side guide can be moved by loosening the screw knob, sliding it to the left or right as necessary, and then tightening it to lock it in place.
  6. Using the printed dots on the machine base as a guide, disengage any dies that will leave partially-punched holes along the ends of your paper. To disengage a die, pull the corresponding arm straight out from the machine until it stops. If you need to re-engage a previously disengaged pin, push the corresponding arm straight into the machine until it stops.
  7. Insert up to 28 sheets (based on 20 lb. paper) into the punch. Align the sheets to the side margin guide and the back of the punching throat to help prevent misaligned holes. Note: If you are punching 10 mil PVC covers, you can only punch size covers at a time to prevent jams and excessive machine wear.
  8. Press the foot pedal to activate the electric punch. Release the foot pedal and remove the punched sheets.
  9. Continue punching the pages of your document – working in sets of up to 28 sheets – until all pages have been punched.
  10. Place a plastic binding comb onto the built-in comb opener. It should be inserted so that the solid side of the spine is against the metal prongs of the comb opener and the loops sit between them. The open side of the comb should be facing up.
  11. Gently pull the binding lever (located on the left side of the machine) forward to open the tines of the binding comb. Once the comb has been adequately opened to insert the pages of your document, release the handle to keep it in its open position.
  12. Jog your document by lightly tapping it against a table or other flat surface to align the holes. Align the punched holes with the open tines of the comb, then insert your book onto the comb (with the front cover facing down). Note: If you are binding a particularly large book, you may find that it is easier to insert the pages onto the comb if you work in smaller sets (starting from the front cover and working back).
  13. After all of the pages of your book have been inserted onto the 19-ring binding comb, push the binding lever back to its original position. This will allow the tines of the comb to close, securing the sheets within the spine.
  14. Remove the completed book by lifting it straight upward from the comb opener.

How Do I Bind with the RENZ ERW Wire Binding Machine?

The RENZ ERW wire binding machine is a 3:1 pitch wire binder that features a heavy-duty electric punch and high-efficiency manual wire closer for use in high-volume binding environments. The ERW’s powerful electric punch has a robust punching capacity of up to 25 sheets (based on 20 lb. paper) and is fan-cooled for consistent and reliable punching of up to 20,000 sheets per hour. Below is a step-by-step guide for binding books with the RENZ ERW wire binder:

  1. Connect the foot pedal to the machine, then attach the power cord. Plug the power cord into the wall and turn the binder on.
  2. Measure the total thickness of your unbound book to determine the diameter of the wire binding spine that will be used. The ERW has a measuring scale located toward the rear of the machine that allows you to easily and accurately find the best wire diameter based on the thickness of your document.
  3. Adjust the wire closer based on the diameter of the your wire using the scale located immediately above the wire closer itself. To set the wire closer, loosen the screw, position the indicator on the line that corresponds to the desired diameter, and tighten the screw to complete the adjustment.
  4. Set the punching depth using the depth margin control knob. The punching depth is the amount of space between the edge of the sheet and the holes that are punched, and is generally greater on thick books than thin books.
  5. Position the paper guides based on the sheet size of your document. This will keep the holes centered along the binding edge of your document.
  6. Use the disengaging dies to eliminate any holes that will be partially punched along the ends of your sheets. Dies are easily disengaged by pulling on the corresponding pins. If you need to re-engage a die that had been disengaged for a previous binding project, push the corresponding pin back into the machine until it stops.
  7. Insert the selected twin-loop binding wire into the wire holder. Place the wire in front of the wire holder, press down onto the back edge of the clamp to open it, push the binding spine under the clamp, and then release the clamp to hold the wire in an upright position. This will allow you to insert the the pages of your book onto the wire as they are punched.

How Do I Change the Fuse on the RENZ ERW Wire Binding Machine?

The RENZ ERW wire binding machine is a powerful 3:1 pitch wire binder that has a high-efficiency electric punch with a fan-cooled motor for use in large offices and other high-output binding environments. The ERW is capable of punching up to 25 sheets per punch and binding books up to 9/16″ thick, and comes equipped with an adjustable punching depth and side margin along with 38 fully-disengageable dies. As with all electric binders, you may need to change the fuse from time to time over the lifetime of the machine. Below is a step-by-step guide for changing the fuse on the RENZ ERW wire binder:

RENZ ERW Wire Binding Machine
  1. Unplug the machine from the wall outlet.
  2. Gently pry the fuse holder out of the machine using a screwdriver.
  3. Check the fuse for obvious signs of defect.
  4. If the fuse needs to be replaced, remove the blown fuse from the fuse holder and replace it with a new one.
  5. Load the fuse holder back into the machine.
  6. Plug the machine into a wall outlet and resume binding.

Lamination Depot Named to Inc. 5000 List of Fast-Growing Companies

Lamination Depot Ranked at No. 2,805 on Inc. 5000 List With 82% Growth

Inc. magazine has ranked laminating and binding supply company Lamination Depot in position 2,805 on their 2012 Inc. 500|5000 list, which recognizes the fastest-growing, privately-owned companies. Lamination Depot ranks no. 238 among all companies listed in the Business Products & Services category and no. 36 among Business Products & Services companies within California.

Over the course of the evaluation period, which spanned from 2008 through 2011, Lamination Depot experienced a revenue increase of 82%. The addition of a number of new products and lines paired with a proactive marketing approach has allowed them to expand their customer base and grow their overall sales volume during an economically-challenging time for many businesses.

In order to maintain the level of customer service that their clients have come to expect, Lamination Depot has put the focus on improving efficiency and leveraging existing resources. Recent company improvements include a remodeled warehouse and shipping stations for streamlined order processing, a redesigned website that gives customers additional access to their account information online and provides an easier shopping experience, and a new method of forecasting that helps to ensure that in-demand products are always in stock.

“Being named to the Inc. 5000 list is truly an honor. In a time when many companies – both public and private – are struggling to turn a profit, we’ve been able to establish a pattern of consistent growth,” says Paul Godfrey, Founder and President of Lamination Depot. “We’ve put a great deal of energy into making every aspect of our business efficient, from the usability of our website to the design of our warehouse, and that has been one of the keys to our continued success.”A complete list of all Inc. 500|5000 honorees is available on Inc. magazine’s website, at www.inc.com/inc5000. To view Lamination Depot’s complete profile, visit www.inc.com/inc5000/profile/lamination-depot.

How Do I Bind with the DFG ETitanWire Wire Binding Machine?

The DFG ETitanWire wire binding machine is a 3:1 pitch wire binder that is specifically designed for high-volume use, featuring a heavy-duty electric punch, die-cast metal construction, and an innovative encased lubrication system, which helps to reduce friction and punch wear. In addition to reliability and durability, the ETitanWire also provides the utmost in versatility, with fully-disengageable dies, an open punching throat and alignment pin for accommodating large sheet sizes, and adjustable side margin and punching depth controls. Below is a step-by-step guide for binding books with the DFG ETitanWire wire binder:

  1. Before using your ETitanWire for the first time, you will need to set it up. Begin by installing the binding handle (located on the right side of the machine). Insert the cord for the foot pedal into the jack on the rear of the machine, then connect the power cord to the right side of the machine and plug the opposite end into a 110V outlet.
  2. Turn the power on using the power switch on the rear of the machine.
  3. Measure your unbound book to determine the required 3:1 twin-loop binding wire diameter. Place the book onto the machine’s base, then push down on the built-in Size Selector until it presses against the top sheet. The top of the Size Selector will indicate which wire size is most appropriate for your document.
  4. Set the punching depth based on the total thickness of your book. Use the sliding knob on the left side of the machine to set the distance between the edge of your sheet and the holes. As a general rule, thinner books utilize a smaller punch margin than do thicker books.
  5. Adjust the side margin guide by loosening the screw, positioning the guide, and tightening the screw to prevent the guide from shifting. This will allow you to center your page within the punch for increased efficiency and a more professional finish.
  6. Depending on your sheet size, you may need to disengage one or more dies in order to prevent any partially-punched holes from appearing on the edges of your document. To disengage any die, pull the corresponding pin straight back from the machine until it stops. If you need to re-engage a die that had been disengaged, push the pin back into the machine.
  7. Insert up to 28 sheets of paper (based on standard 20 lb. thickness) into the punch. To help ensure that all of your pages are punched with a consistent, uniform pattern, take care to align the pages against the back of the punch and the side guide.
  8. Press the foot pedal to electrically punch your pages, then release it and retrieve your punched sheets.
  9. Repeat steps 7 – 8, working in sets of up to 28 pages, until all sheets in your document have been punched.
  10. Adjust the wire closing mechanism based on the binding wire size that is being used. To adjust the wire closer, loosen or tighten the two knobs located at the rear of the machine. Perform a test closure with a sample wire, then fine-tune your settings as necessary.
  11. Arrange the pages of your book in order from first to last, then place the back cover face-down onto the front cover. This will allow you to hide the seam of the wire within the book after binding.
  12. Place your document onto your work table with the punched side hanging slightly off the edge. Insert the selected wire into the holes in the book, starting at one side and working toward the other.
  13. Once the wire has been completely inserted into the book, lift the book and the wire off of the table and place the wire into the wire closer. The wire should be placed so that the open side is agains the bottom of the wire closer.
  14. Pull the binding handle forward to activate the wire closer. Once the wire has been completely closed, return the handle to its upright position to release the wire and complete the bind.
  15. Lift the book out of the wire closer, then flip the back cover around to the back of the book. This will conceal the seam of the wire and result in a more polished and professional look.

How Do I Bind with the DFG EC1000 Coil Binding Machine?

The DFG EC1000 coil binding machine is a manual-punch coil binder that features a 6″ electric coil inserter for increased productivity, making it a great fit for use in offices, schools, and other medium-to-high volume binding environments. It features sturdy metal construction for years of dependability, and has a simplified control scheme that requires only minimal adjustments between projects. Below is a step-by-step guide for binding books with the DFG EC1000 coil binder:

  1. If you will be using your DFG EC1000 for the first time, you will need to begin by setting the machine up. Remove the blue knob located on the right side of the machine, then insert the punching handle so that it is in an upright position. Thread the knob through the punching handle and tighten to secure. Connect the foot pedal cord to the jack located at the back of the machine. Attach the power cord to the machine, then insert the opposite end into an outlet.
  2. Adjust the side guide so that your pages will be centered within the punch. To position the side guide, loosen the screw, slide the guide based on the size of your sheet, then lock in place by tightening the screw.
  3. Set the punching depth margin by using the sliding control located on the lower left corner of the machine. As a general guideline, thicker books should have a greater punching margin than is required for binding thin books.
  4. Measure the thickness of the book using the Size Selector to determine the recommended plastic binding coil size. Place your unbound book beneath the Size Selector, then press down until the bottom sits flush against the top of your document. The top of the Size Selector will indicate the appropriate spiral binding coil for your book.
  5. Insert up to 25 sheets (based on 20 lb. paper) into the punching throat, aligning the pages to the side margin and the back of the punch. This will help to ensure a precise punch across all of the pages in your document.
  6. Pull the punch handle toward you to punch the sheets, then return it to its original position. Remove the sheets from the punch.
  7. Repeat steps 5-6, working in sets of up to 25 pages until all of the sheets in your document have been punched.
  8. Stack the pages of your document in order, then tap them against a flat surface to jog them. Manually insert the selected binding coil into the first 4 – 5 holes.
  9. Press the foot pedal to start the roller motor. Place the coil against the spinning roller, positioning the open holes to the left side of the page and the inserted coil to the right. The coil will automatically advance through the holes as the roller spins. To speed up the binding process, you can move your book to the right as the coil is being inserted.
  10. Finish the bind by cutting and crimping the coil using a set of manual coil crimping and cutting pliers. Trim and crimp the coil on both sides of the book to secure the pages on the spine.

How Do I Bind with the DFG EC2000 Coil Binding Machine?

The DFG EC2000 coil binding machine is an all-electric coil binder designed for high-volume use, featuring heavy-duty components and professional-grade capabilities that make it a great fit for any office or industrial environment. The EC2000 is made from durable, die-cast metal and offers a wide array of user-friendly features, such as a side margin guide, an adjustable punching depth, and fully-disengageable dies. Below is a step-by-step guide for binding books with the DFG EC2000 coil binder:

  1. If this is the first time that your EC2000 is being used, then you will need to set it up. Insert the foot pedal plug into the jack located at the rear of the machine (below the power switch). Connect the power cord to the right side of the machine and to a power outlet.
  2. Set the red power switch (located at the top left corner of the back of the machine) to the “On” position.
  3. Ensure that the switch in the upper right corner at the top of the machine is set to “Punch.”
  4. Use the built-in Size Selector (located on the to the right of the disengaging pins) to determine the appropriate coil diameter for your book. Place a complete, unbound book onto the base of the machine and push the Size Selector down until it sits flush against the book. The top of the Size Selector will indicate the best binding coil diameter.
  5. Select the punch margin using the sliding switch located in the bottom left corner of the front of the machine. As a general guideline, thicker books require a larger punching margin (the amount of space between the holes and the edge of the sheet) than do thinner books.
  6. Set the side margin guide (located on the left side of the machine base) to the desired position in order to center the holes on your document. The side margin guide is easily adjusted by loosening the screw, sliding the guide, and re-tightening the screw to secure it in place.
  7. Using the guide dots printed on the machine base, disengage pins as needed in order to eliminate any partially-punched holes. Dies can be disengaged by pulling the corresponding silver pins straight out.
  8. Insert up to 22 sheets (based on 20 lb. paper) into the punch. To ensure that the holes are punched correctly, align the pages to the back of the punching throat and the side margin guide.
  9. Press the foot pedal to punch your pages, then release the pedal and remove the punched sheets.
  10. Repeat steps 7 – 8, working in sets of up to 22 pages until all pages have been punched.
  11. Set the switch on the upper right corner of the top of the machine to “Bind.”
  12. Manually insert the selected plastic binding coil into the first 4 – 5 holes of your document.
  13. Press the foot pedal to spin the electric coil inserter. Position your book so that the inserted portion of the coil is to the right and the open holes are to the left. Lightly press the coil against the spinning roller to advance the coil through the holes. You can speed up the coil inserting process by moving the book to the right while the coil is being inserted. Note: Only coils up to 7/8″ in diameter can be inserted using the EC2000’s built-in electric coil inserter. Larger coils can be used, however they will have to be inserted manually.
  14. Immediately after the coil is inserted into the last hole, pull the book away from the roller and/or release the foot pedal to stop the coil from advancing any further.
  15. Cut and crimp both ends of the binding coil using a coil crimping tool. Crimping the coils is essential for keeping the book together and preventing the coil from twisting out of the holes.

How Do I Bind with the DFG TitanCoil Coil Binding Machine?

The DFG TitanCoil coil binding machine is a user-friendly coil binder that pairs heavy-duty durability with streamlined controls for an enhanced binding experience. Featuring a powerful manual punch that is capable of punching up to 25 sheets per pull and an electric coil inserter, the TitanCoil makes coil binding fast and efficient. Below is a step-by-step guide for binding books with the DFG TitanCoil coil binder:

  1. If this is the first time that your TitanCoil is being used, then you will need to begin by installing the handle and foot pedal. To install the punch handle, remove the black knob located on the right side of the machine. Insert the punching handle into the machine so that it is in an upright position. Thread the knob through the handle and tighten to secure it in place. Connect the foot pedal to the jack on the back of the machine, then attach the power cord to the machine and the wall.
  2. Set the side guide (located on the left side of the machine base) to center the sheet for punching. The side guide can be adjusted by loosening the top screw, sliding the guide into place, and tighten the screw to keep it in the desired position.
  3. Select the punching margin (the amount of space between the punched holes and the edge of the paper) using the sliding switch on the left side of the machine. As a general rule, thicker books should use a larger punching margin than smaller books require.
  4. If necessary, disengage any dies that would leave partially-punched holes on the edge(s) of your document. To disengage a die, pull the arm that corresponds to that die straight out from the machine. To re-engage a die that had previously been disengaged, simply push the extended arm back into the machine.
  5. Determine the appropriate binding coil diameter by using the TitanCoil’s Size Selector, which is located on the right side of the face of the machine. To use the Size Selector, place your unpunched document onto the base of the machine, then push the Size Selector down until the bottom tab is flush against the top of the document. The top of the Size Selector will indicate the recommended coil diameter.
  6. Place a set of up to 25 sheets (based on standard 20 lb. paper) into the punching throat. Align the paper to the side guide and the back of the punching throat to help ensure a precise punch.
  7. Pull the punch handle forward to punch the inserted sheets. Push the handle back to its starting position to complete the punch, then remove the punched sheets from the machine.
  8. Repeat steps 6 – 7 until all pages of the document have been punched.
  9. Jog the pages of your book by tapping them onto a flat surface, then manually insert the selected spiral binding coil into the first 4 – 5 holes.
  10. Press the foot pedal to engage the electric coil inserter motor. Position your book so that the inserted section of the coil is to the right and the open holes are to the left. Lightly press the coil against the spinning roller to advance it through the open holes. If you would like to speed up the inserting process, you can move your book to the right as the coil spins through the holes. Note: The electric coil inserter can only be used with coils up to 7/8″ in diameter. Larger coils can be used with the TitanCoil, but must be inserted manually.
  11. As soon as the coil is inserted into the last hole, pull the book away from the roller and/or release the foot pedal to stop it from advancing any further. If you accidentally advance the coil too far, simply flip your book over (so that the side with the excess coil is to the right) and press it against the electric coil inserter to advance it to the desired position.
  12. To complete the bind, use a pair of coil crimping pliers to trim away the excess coil and secure the pages onto the spine.