The Fastback 15xs binding machine from Powis Parker is an easy-to-use and easy-to-maintain thermal binding system that creates both hardcover and softcover books. Unlike traditional punch-and-bind machines that create large amounts of dust and paper debris, the Fastback 15xs uses adhesive-lined Super Strips for a clean and efficient binding process. Though the machine requires very little maintenance, cleaning it occasionally will help to keep it running at its optimum level of performance. Below is a step-by-step guide to cleaning your Fastback 15xs thermal binder:
Cleaning the Outside of Your Fastback 15xs
- If the outside of your binding machine gets dirty, you can clean the cover using a soft, damp cloth and mild detergent.
- Remove any adhesive residue from the inner book clamps by opening the cover and wiping it away using a cotton cloth that has been dampened with the included citrus cleaning solution.
Cleaning the Inside of Your Fastback 15xs
- Adhesive residue on the platen is easiest to remove when the machine is cool. Turn the machine off and let it cool completely (approximately one hour), then peel off the adhesive.
- If you need to clean the platen immediately and cannot wait for the machine to cool, you can still remove the adhesive by following a different process. Begin by putting on the heat-protective glove that was included with your machine. Since the surface